Roller Hardness HSC 58-60 Degree Flattening Machine For Expanded
Metal Mesh
Applications:
The flattening machine can rolling and reshaping the non-ferrous
metal mesh and ferrous metal mesh of stamping tensile.
Expanded metal mesh flattening machine is specially designed for
expanded metal mesh flattening.It’s a accessory equipment of
expanded metal machine. It can make expanded wire mesh smoothly.And
the flattened wire mesh have much more widely different
applications.
Flattening machine is specially used for expanded metal
mesh,aluminum expanded metal mesh,stainless steel expanded metal
mesh,black wire mesh, and other kinds of wire mesh.
When expanded metal machine finished produce expanded metal mesh or
aluminum expanded metal mesh,the mesh surface is not pretty
well,need further processing,then should use flattening machine
flatten the mesh.
Flattening Machine 450 Type Parameter:
| Flattening Machine 450 Type |
| Working width | 1500mm |
| Roller Diameter | 450mm |
| Thickness range | 0.3-2.0mm |
| Working speed | 12-15m/min |
| Motor | 11KW 220/380v 50Hz |
| Weight | 6000KG |
| Measurement | 2700mm*1500mm*1500mm |
Installation And Debugging:
1. Wipe the roll surface, make the surface clean, to make sure no
foreign body on the rolls;
2. Add appropriate amount lubrication oil into the reducer;
3. Check the machine parts without foreign body and tools;
4. Adjust top roll to make the space between top roll and lower
roll greater than the mesh thickness;
5. Starting motor, made the machine dry run a quarter of an hour,
then start flattening the mesh, gradually adjusting the two lead
screws pressure, to make the mesh level up.
Safety Caution:
1.Set bench board on the side of feeding, must not place metal
foreign body and tools on the bench board;
2.When replace the mesh thickness, first adjust the gap between the
two rolls greater than the mesh thickness, then gradually adjusting
the two lead screws pressure, to make the mesh level up. Must not
flattening when the gap is too little, it will result in equipment
damage;
3.Pay attention to the personal safety when operating. The distance
between two hands and rolls should not less than 300mm;
4. For security, set ground points under the motor, must have
reliable ground points when the machine working.
Expanded metal mesh after flattened:
